Ferax FTS-710 Betriebsanleitung Seite 34

ReCIPROCATINg sAW
The numbers in the following text correspond with the pictures at page 2
Alwaysreadtheinstructionforelectricalproductscarefullybeforeuse.Itwillhelp
you understand your product more easily and avoid unnecessary risks. Keep this
instruction manual in a safe place for future use.
Introduction
The machine is intended for impact drilling in materials as brick and concrete. Besides it
can be used for drilling holes in wood, metal and plastics.
Contents
1. Technical specifications
2. Safety instructions
GB
3. Operation
4. Troubleshooting
5. Maintenance
1. TeCHNICAL sPeCIFICATIONs
Voltage
Frequency
Power input
No load speed
Maximum cutting thickness
Stroke length
Weight
Lpa (sound pressure level)
Lwa (sound pressure capacity)
Vibration
PRODUCT INFORMATION
Fig.A
1. Blade
2. Footplate
3. Blade clamp screw
4. Trigger switch
5. Speed controller
6. Trigger lock button
7. Mains lead
8. Footplate length adjustment screws
9. 3 mm hexagon key (not s hown)
10. 4 mm hexagon key (not shown)
34
| 230 V~
| 50 Hz
| 710 W
| 600-2400/min
| 115 mm
| 30 mm
| 3,33 kg
| 88,3+3 dB(A)
| 99,3+3 dB(A)
| 19,073+1,5 m/s
2
Ferax