Werbung
EN
Bluetooth speaker
Instructions
To turn on the speaker, push the ON/OFF button to ON, the speaker will beep and the blue LED will flash.
Blue LED stays on when playing the music.
The speaker will keep flashing when the battery is low.
To turn off the speaker, push the ON/OFF button to OFF
Led indicator:
Charging: Red LED on
Fully Charged: Red LED off
Pairing Mode: Blue LED flash quickly
Connected: Blue LED stay on
Playing: Blue LED stays on
Charging the speaker:
1.
Before using the speaker for the first time, charge it more than 6 hours
2.
Plug the USB cable into the port on the speaker, plug the other end into the USB port on the computer.
3.
Red LED will turn on to indicate unit is charging.
Pairing the device:
1.
Push the ON/OFF button to ON, the speaker enters into pairing mode. Follow the instruction of your device to search the
speaker.
2.
Find the speaker called " MO8902".
3.
Blue LED will stay on when complete.
Product specifications
Bluetooth standard:
Bluetooth agreement:
Working Distance:
Frequency Range:
S/N Ratio:
Distortion Factor:
Playing Time:
Charging time:
Safety and general information:
Do not expose the device to water or attempt to disassemble the device. If exposed or disassembled, user may be at risk
from electric short.
Handle this product with care, without proper care the device may not function properly.
Do not use a product in the aircraft and in the hospital.
Do not expose the device under the sunlight directly.
Device may get warm during charging
DE
Bluetooth Lautsprecher
Anleitung
Um den Lautsprecher einzuschalten, drücken Sie die ON / OFF Taste auf ON, der Lautsprecher piept und die blaue LED-Anzeige
blinkt.
Die blaue LED-Anzeige leuchtet, wenn die Musik abgespielt wird.
Der Lautsprecher blinkt, wenn der Akku leer ist.
Um den Lautsprecher auszuschalten, drücken Sie die ON / OFF Taste auf OFF
LED Anzeige:
Aufladen:
Voll aufgeladen:
Kopplungs-Modus: Blaues LED blinkt schnell
Verbunden:
Abspielen:
Aufladen des Lautsprechers:
1.
Bevor Sie den Lautsprecher zum ersten Mal benutzen, laden Sie ihn mehr als 6 Stunden auf.
2.1+ EDR
A2 DP
10m
100Hz-18KHz
≥80Db
≤0.5%
2-3 hours
3 hours regular, more than 6 hours' initial.
Rotes LED an
Rotes LED aus
Blaues LED leuchtet dauerhaft
Blaues LED leuchtet dauerhaft
Werbung
