Maintenance:
WARNING
• Always disconnect power before carrying out maintenance on the equipment.
• Do not touch the PCB without wearing an anti-static wrist strap. The PCB must
be stored in an antistatic bag when moving it or when shipping it by post.
• Keep hands and fingers away from moving parts, such as the fan's drive roll.
Description of the equipment
The welding apparatus EXTREMIG is an inverter
electrode welder, designed for input from single phase
230 V 50/60 Hz. It is recommended that a 16 A fuse is
used with a time delay or with an earth leak circuit
breaker. The equipment is ideal for DIY projects and
lighter maintenance tasks.
Unpacking
Remove the box, bags and polystyrene that contains
the welding apparatus and accessories.
Delivery includes:
Welding apparatus
Welding cable
with electrode holder
earth cable with clamp
User manual
On delivery, check there is nothing missing or damaged.
P. Lindberg A/S
Tel.: +45 70212626
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Sdr. Ringvej 1
6600 Vejen, Denmark
8
MAN 9060906 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk