Specifications - Nikon AF-I Nikkor ED 600mm f/4 D IF Gebrauchsanweisung

warn
Standard Accessories
Slip-on leatherette front lens cap
Rear lens cap LF-1
39mm screw-in filter L37C
Holder for gelatine filters
Strap
Lens hood HK-18-1,2
Heavy duty case CT-604
Optional Accessories
Other 39mm screw-in filters
Teleconverter TC-14B
Teleconverter TC-301
Teleconverter TC- 14E
Teleconverter TC-20E*
• Autofocus cannot be used with the AF-1 Nikkor ED 600mm 174 D IF lens when it is used with the TC-20E
teleconverter. Use of an AF-1 teleconverter is recommended although other models can be used.
SPECIFICATIONS
Focal length: 600mm
Maximum aperture: f/4
Lens construction: 9 elements in 7 groups (plus dustproof glass plate built into front)
Picture angle: 4° 10'
Distance scale: Graduated in meters and feet from 6m (20 ft.) to infinity («>)
Distance information: Output into camera body
Aperture scale: f/4—f/22 on both standard and aperture-direct-readout scales
Minimum aperture lock: Provided
Diaphragm: Fully automatic
Exposure measurement: Via full-aperture method with AI cameras or cameras with CPU
interface system; via stop-down method for other cameras
Focusing: Nikon Internal Focusing (IF) system
Tripod mounting: Built-in tripod mounting collar rotatable through 360°
Lens hood: Provided
Filters: Slip-in glass filter holder accepts 39mm screw-in filters; gelatin filter holder accepts
gelatin filters
Mount: Nikon bayonet mount
Dimensions: Approx. 166mm (6.5 in.) dia. x 417mm (16.4 in.) extension from flange; approx.
425mm (16.7 in.) long (overall)
Weight: Approx. 6,050g (213.4 oz.)
LENS CARE
• Clean lens surface with a blower brush. To remove dirt and smudges, use a soft, clean cotton
cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner. Wipe in a circular
motion from center to outer edge, taking care not to leave traces and not to touch the other
lens parts.
If you use ether in cleaning the lens, a smudge sometimes appears on the surface of a multi-
coated lens. If this happens, wipe it again with a cotton cloth moistened with alcohol.
• Take care in cleaning the rear part of the lens with a spraygun-type blower because its strong
stream of air may damage the lens diaphragm blades. To avoid damage, set the lens at full
aperture and use the blower far enough away.
• Always protect the lens surface from dirt or damage. The lens hood also helps to protect the lens.
• Keep the lens cap in place whenever the lens is not in use.
• If you will not use the lens for a long time, protect it from rust and mold by storing it in a
cool, dry place. Also, do not store in direct sunlight, and keep it away from naphthalene or
camphor.
• Be careful not to get the lens wet or drop it in water. Water on the lens may cause
malfunction.
16