About These Instructions; For Your Safety; Specified Use; Scope Of Delivery Wfe 2Cs - Weller WFE 2CS Betriebsanleitung

English

1. About these instructions

Thank you for placing your trust in our company by
purchasing the Weller WFE 2CS. Production was based on
stringent quality requirements which guarantee the perfect
operation of the device.
These instructions contain important information for safe
and correct initial operation of the soldering fume extraction
device WFE 2CS, including continued operation,
maintenance and self-correction of simple faults.
● Read this Operating Manual and the enclosed Safety
Instructions completely prior to initial operation of the
device and before starting work with the soldering fume
extraction device WFE 2CS.
● Ensure that these instructions are accessible to all users.
1.1. Applied directives
The Weller soldering fume extraction device WFE 2CS
complies with the specifications of the EC Declaration of
Conformity based on Directives 2004/108/EC and
2006/95/EC.
1.2. Further applicable documentation
- Operating instructions for the soldering fume extraction
device WFE 2CS
- Safety information booklet accompanying these
instructions

2. For your safety

The soldering fume extraction device WFE 2CS has been
manufactured in accordance with state-of-the-art
technology and the recognised technical safety regulations.
There is nevertheless the risk of personal injury and damage
to property if you fail to observe the safety information set
out in the accompanying booklet and the warnings given in
these instructions. If the soldering fume extraction device
WFE 2CS is passed on to third parties, always hand over the
operating instructions as well.

2.1. Specified use

Always use the soldering fume extraction device WFE 2CS
exclusively for the purpose specified in these operating
Technical data WFE 2CS
Dimensions L x W x H (mm):
Weight
Voltage
Electr. power
Max. vacuum
Max. conveying capacity
Fine dust filter
Compact filter
5
Cinstructions, namely the soldering fume extraction from
working surfaces under the conditions specified here.
Specified use of the soldering fume extraction device
WFE 2CS also includes
- observance of this Operating Manual,
- you read and follow all additional accompanying
documents,
- observance of the locally applicable accident prevention
regulations.
The manufacturer shall not be liable for damage resulting
from unauthorised alterations to the machine.

3. Scope of delivery WFE 2CS

- WFE 2CS incl. filter
(005 87 627 01 E12 filter set with 10 M5 pre-filters
005 87 621 03 Fine dust filter M5 for E12 filter
- Connecting cable
- Operating instructions
- Safety information booklet

4. Device description

The Weller WFE 2CS is designed as a soldering fume
extraction device for working surface extraction for the
following properties and functions:
- It has a powerful maintenance-free turbine and is
perfectly suitable for continuous operation in industry.
- Individual arrangement of the pipe system with max. 2 pipe
nozzles.
- 3-stage filter (fine dust, HEPA filter and activated carbon
filter) tuned to the standard composition of soldering
smoke.
- High filter efficiency: when using tested HEPA filters of class
E12, according to EN 1822 the filtration efficiency of the
filter set in delivery condition is 99.5 %, at a particle size of
0.18 µm (values apply only if original parts are used).
- The speed of the turbine determines the flow rate and can
be adjusted steplessly to a max. of 120m³/h via remote
control.
320 x 320 x 395
9 kg
100 V - 240 V
50/60 Hz
175 VA
2000 Pa
120 m³/h
Stage 1: fine dust filter M5 absorbs 40-60 % fine dust > 1 mm.
Stages 2+3: HEPA filter class E12 (99.5 % with particle up to approx. 0.18 µm)
is combined with an activated carbon filter.
(10 pieces))