Controls And Indicators; Volume Control - Sharp GX-BT7 Bedienungsanleitung

Precautions (continued)
 If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
 In case of an electrical storm, unplug the unit for safety.
 Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
 The AC power plug is used as a disconnect device and
shall always remain readily operable.
 Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
 The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
 No naked fl ame sources, such as lighted candles,
should be placed on the apparatus.
 Attention should be drawn to the environmental aspects
of battery disposal.
 This unit should only be used within the range of 5°C
- 35°C (41°F - 95°F).
 The apparatus is designed for use in moderate climates.

Controls and indicators

1 2 3
10
GX-BT7_OM_EN.indd 2 GX-BT7_OM_EN.indd 2
4 5 6
7 8
9
11 12
Warning:
The voltage used must be the same as that specifi ed on
this unit. Using this product with a higher voltage other
than that which is specifi ed is dangerous and may re-
sult in a fi re or other type of accident causing damage.
SHARP will not be held responsible for any damage re-
sulting from use of this unit with a voltage other than that
which is specifi ed.


Volume control

The sound level at a given volume setting depends on
speaker effi ciency, location, and various other factors. It
is advisable to avoid exposure to high volume levels. Do
not turn the volume on to full at switch on. Listen to music
at moderate levels.

Front panel
1. Audio in socket ...................................................... 12
2. On/Stand-by Button ............................................ 5, 7
3. ESound Button ......................................................... 5
4. USB terminal ................................................ 9, 10, 11
5. Function Button ....................................................... 5
6. Pairing Button .......................................................... 7
7. Volume Down Button ............................................... 5
8. Volume Up Button .................................................... 5
9. LED light .................................................................. 5
10. Remote Sensor ........................................................ 4
11. USB indicator ........................................................... 5
12. Bluetooth/Pairing indicator ................................ 5, 7
E-2
Page
2013-08-02 11:24:46 2013-08-02 11:24:46