System Components Fitted To The Gate; Device Overview; Signal Indicators - ASO Safety Solutions INDUS rail 71-242 Betriebsanleitung

INDUS rail 71-242 + INDUS rail 71-942
Inducti ve signal transmission system
5. System components fi tt ed to the gate
1
3 11 3
10 1 
 

Example of use
The actual arrangement of the individual components
depends on the design of the gate in questi on and the
conditi ons at the installati on site.

6. Device overview

6.1 Signal Indicators

LED Power (green)
Supply voltage
LED Transmit Opening (red)
Fault, opening movement - travelling edge(s)
LED Stati onary Opening (red)
Fault, opening movement stati onary edge(s)
LED Transmit Closing (red)
Fault, closing movement - travelling edge(s)
LED Stati onary Closing (red)
Fault, closing movement - stati onary edge(s)
V3.��: If no error is present, then LED Power shows the functi on control (briefl y off ).
V4.0 and later: If no error is present, then LED Power shows the operati ng state (on).
During the output of an error message, the number of output pulses indicates the error:
Pulse Error message
1 Voltage supply outside of the valid value range
 INDUS transmission error
 Output control Open faulty
4 Output control Close faulty
5 Data transmission with microcontroller faulty
16 16
2
1 INDUS rail 71-4 (INDUS rail 7��-942) control device
2 Stati onary coil core
3 Travelling coil core
4 Steel cable acti ng as transmission medium
4 3
INDUS rail INDUS rail
71-242 71-942