La Crosse Technology WTK27 Bedienungsanleitung Seite 20

Note:
1. The compass must be kept in a level position when in use. Taking a measurement
while the unit is not horizontal (in relation to the horizon) can result in large
measurement error
2. Always take bearings in the open air, because it is easily affected by disturbing
sources of magnetism.
3.
Direction Meaning Direction
N North NNE
E East ESE
S South SSW
W West WNW
(1) Compass Sensor Calibration
The compass should be calibrated before use OR when the battery is replaced.
In COMPASS mode, hold "COMPASS" button for 3 seconds to enter the compass

sensor calibration mode, press COMPASS button to start the calibration
Keep the unit in a level position or on top of a non-metallic table/desk, reference

to the arrow showing in LCD, rotate the compass clockwise for one full rotation
slowly.
Meaning Direction Meaning
North- NE Northeast
northeast
East- SE Southeast
Southeast
South- SW Southwest WSW
Southwest
West- NW Northwest NNW
Northwest
EN-8
Direction Meaning
ENE East-
northeast
SSE South-
Southeast
West-
Southwest
North-
northwest