Time Mode - La Crosse Technology WTK27 Bedienungsanleitung

TIME MODE

(1) Manual Time Setting
Press and hold "MODE" key for 3 seconds to enter settings. Press "▼"or "▲"to

change setting, and press "MODE" button to confirm and move to next setting.
Setting sequence are as follow: 12/24 hour format, Hour, Minute, Second, Year,

Month/Day sequence, Month, Day, Temperature unit, Pressure unit, and Altitude
unit.
If no button is pressed for 15 seconds, the display will return to previous mode.

Press "COMPASS" button to exit the Time Setting Mode

(2) Daily Alarm Setting
Press "TIME/AL" button to navigate to Alarm Time Display. ("AL" icon display on

the LCD
clock setting mode. Press "▼"or "▲"to change setting, and press "TIME/AL"
button to confirm and move to next setting.
The setting sequence are as follow: Hour, Minute and Alarm ON （

( )
When alarm is on, the symbol " " appears and when it is off, the symbol "

disappears.
When alarming, " " will flash, press any button to stop alarming. If no button

pressed for 15 seconds, the alarm will auto stop after 2 minutes.
ALTIMETER AND BAROMETER
After battery inserted, the device will automatically measure the barometer readings
as well as the maximum sea level pressure reading.
(1) To Set and Reset Altimeter:
Altimeter: measures in either meters or feet, range:-400 ~ 9000 meters. The device
provide both current altitude and maximum altitude
), Hold "TIME/AL" button for 3 seconds to enter alarm
EN-5
）/OFF
"