Hybrid Graphics; Changing Graphics Mode - Fujitsu AMILO Xi 3670 Erstinbetriebnahme

Hybrid graphics

Your notebook is equipped with a hybrid graphics system. By clicking the Quick Start
button, you can switch between battery-saver and performance mode.
Use the graphics unit integrated in the chip set for applications which are
less graphics-intensive, such as video playback, e-mail and Internet surfing.
This reduces heat generation, noise levels and power consumption. As a
result, battery life is increased (battery saver mode).
If you require a high level of performance, for example, for games, you can
switch to the external graphics unit (performance mode).

Changing graphics mode

In your notebook, the external graphics mode is preconfigured ex works (performance mode).
A device connected to an HDMI port of your notebook (FullHD resolution) can only be
activated in performance mode via the external graphics unit.
If there are programs active which influence graphics output (e.g. games
or TV software), then it may not always be possible to switch between the
modes. End all the programs concerned before switching.
The process of switching between graphics modes may take longer than ten seconds.
► Click the Quick Start button
The graphics display switches to battery-saver mode.
► Click the Hybrid VGA
The graphics display switches to performance mode.
10601078868, edition 1
Hybrid VGA on the Multimedia Board of your notebook:
quick-start button again.
Innovative technology
English - 5