Technical Specifications - Gewiss GW 10 681 Bedienungsanleitung

TECHNICAL SPECIFICATIONS

Power Supply
BUS voltage KNX/EIB: 29V dc SELV
BUS absorption: 5mA
External auxiliary voltage: 12/24V ac/dc +/- 10%
Max. auxiliary power absorption: 150mA
KNX/EIB Inputs
3 contacts without potential
the power is supplied internally at 24V 1mA
Relay outputs
2 NO contacts 2A cos 0.6 - 24V ac
Channel 1: general use or electrical lock command
Channel 2: courtesy lights or general use
Transponder reader
Chip reader/writer transponder Atmel/Temic
Power supplied internally at 5V dc
Working power frequency: 125KHz
Control elements
Rear button to switch between normal mode / programming mode
23
E
N
G
L
I
S
H