Introduction; Features - Mitsubishi Diamond Pro 2060u Handbuch

1
1

INTRODUCTION

Congratulations on your purchase of the high resolution
color monitor. We designed this monitor to provide you with
years of reliable trouble-free operation.
This guide tells you how to connect, adjust and care for your
monitor. This guide also provides technical specifications
and instructions for troubleshooting any basic problems
you may experience with your monitor.
1.1

Features

This monitor is a 55cm/22" (508mm/20" Viewable Image
Size) intelligent, microprocessor-based monitor compat-
ible with most analog RGB (Red, Green, Blue) display
standards.
It provides crisp text and vivid color graphics with both PC
and Macintosh platforms.
• The monitor's wide auto-scanning compatibility range
makes it possible to upgrade video cards or software
without purchasing a new monitor.
• Digitally controlled auto-scanning is done using an inter-
nal microprocessor, for horizontal scan frequencies
between 30kHz and 121kHz, and vertical scan frequen-
cies between 50Hz and 160Hz. The microprocessor-
based intelligence allows the monitor to operate in each
frequency mode with the precision of a fixed frequency
monitor.
• The monitor contains resident memory for pre-pro-
grammed screen display standards and is also capable
of storing additional user adjustment parameters.
• The monitor has "AUTO SIZE ADJUST" function to
optimize the size and distortion for Non-Preset timings.
• The monitor is capable of producing a non-interlaced
maximum addressable resolution format of 2048 dots x
1536 lines. This display is well suited for windowing
environments.
• Because of the analog signal inputs, the monitor can
display an unlimited palette of colors that can be manu-
ally adjusted to suit your specific needs.
• The monitor has a power management function ac-
corded to VESA TM -DPMS
the monitor must be connected to a system compliant
TM
with the VESA -DPMS
computer and/or video card instructions for proper op-
eration.)
• To ensure ease of installation and ongoing use, the
monitor features On Screen Display (OSD) of all monitor
set-up and adjustment functions.
• For use in a variety of applications, the monitor complies
with UL 1950, CSA C22.2 No.950 and EN60950 for
safety, FCC Class-B, VCCI Class-B and EN55022 Class-
B for EMI, MPR-II, ISO 9241-3, ISO9241-7 and ISO9241-
8 for ergonomics. The monitor also complies with TCO'99
guideline for environmental safe use.
TM -standard. To save energy,
TM
-standard. (Refer to your
• The world's standard DIAMONDTRON NF CRT up-
graded and pure picture images.
• The monitor complies with Video Electronics Standards
Association (VESA
cation. If your computer is Plug & Play compliant setup
will be done automatically.
• Fine 0.24mm aparture grille pitch/Maximum address-
able resolution of 2048 x 1536.
• USB self-powered hub with 1 upstream port and 3down-
stream ports.
-1-2 -
TM TM
) DDC 2B and 2Bi (EDID) specifi-