Operation; Switching Off; Fault Elimination - HSM Profi Pack 400 Betriebsanleitung

7. Operation

Switching on
Press rocker switch pos. 1.
1
Cutting unit starts.
Feeding cardboard boxes
• Cardboard boxes are processed up to a width of 415 mm.
• Wider cardboard is automatically cut.

Switching off

Tap rocker switch pos. 2.
Rocker switch resets to zero position.
2
Cutting unit stops.

8. Fault elimination

To remove material when there`s a fault, press and hold down rocker switch pos. 2.
2 Cutting unit moves backwards.
If there`s a fault, before notifying customer service, please check:
• Is mains plug inserted?
• Is the device switched on?
• Is the motor overloaded?
0503
415 mm
Insert
Set rocker switch to position "1"
Allow motor to cool down for approx. 15–20 min.
english
Profi Pack 400
9