Safety Instructions; Installation - HSM Profi Pack 400 Betriebsanleitung

Profi Pack 400

4. Safety instructions

• Read all instructions before start-up of the device and save these instructions for later
use.
• Follow all warnings and instructions marked on the product.
• Make sure no liquid is spilled on or in the device.
• Keep product out of the reach of children.
• The Profi Pack 400 should be operated only with an operator in attendance.
• You are not allowed to carry out repairs on your own.
• If there is damage or the device is not functioning properly, switch it off, pull out the
plug from the mains and call customer service.

5. Installation

The device must not be set up near a heating element or another source of warmth.
Take care that the mains plug can be reached easily.
Before plugging in the mains plug, check that the the voltage and frequency of your
mains supply are in accordance with the specifications on the type plate.
6. Cleaning
• Switch the device off, unplug it from the mains.
• Cleaning must only be performed with a soft fabric and a mild soapwater solution.
The use of abrasive material, petrol or thinner is forbidden.
8
Risk of injury!
Never reach into the slit of the feed opening.
Risk of injury by pulling in!
Keep long hair, loose articles of clothing, ties, scarves, jewellery
etc. away from feed opening. Material with the tendency to form
loops, e.g. tapes, strapping material, etc. must not be processed.
Before changing the location, cleaning or anything else other than
normal operation
turn off and unplug the device!
Maintenance and service work may be performed only by:
• HSM customer service
• specially trained staff (e.g. qualified electricians)
• service technicians from our contracting partners
english
0503