Locating The Ir Receiver - vogel's SAVA 1014 Gebrauchsanleitung

5.1

Locating the IR receiver

Place the very small IR receiver (1) that comes with the
SAVA 1014™ so that it can be seen by your (infrared) remote
control and receive the commands (max. 10 metres).
•
The most logical location for the IR receiver is, for example,
on the cabinet in which the A/V equipment is located or near
the TV.
•
You can run the cable underneath or behind, using the notch
at the back of the IR receiver housing; this allows the cable
to be hidden easily.
•
Use the self-adhesive strip which is supplied to locate the IR
receiver just about anywhere you please.
•
Experiment with the location before you stick the IR receiver
in its final position.
Note! The sticky strip may lead to discolouration or leave glue
residues on certain surfaces.
SAVA 1014 7