Tru-Test S1 Schnellstartanleitung Seite 4

Step 4:
Note:
Only do Steps 4-10 if
converting a mechanical crate to
electronic weighing. Otherwise go
straight to Step 11.
If converting to electronic
weighing, perform a span
calibration on the S-Cell.
Download Data Link PC Software
from
livestock.tru-test.com/applications/
datalink
4
.
Step 5:
Plug the indicator into your laptop
using the USB cable. Plug the S-Cell
into the indicator.
Press to power on the indicator.
Launch Data Link on your PC and click
, Span Calibration.