Using The Loophear Tm - Geemarc LoopHEAR 102 V2 Bedienungsanleitung

USING THE LoopHEAR
FIXING THE HAND HELD Listener HOLDER
The hand held listener holder can be attached to the
TM
LoopHEAR on the left hand side or the right hand side,
depending on where it would be convenient for use. In order to
fix the attaches the receiver holder:
1. Insert the lug at the side of the holder gently into the slot in the
cabinet.
2. Insert the screw provided with the holder into the hole of the
holder and into the hole in the side of the cabinet, and tighten
the screw fully using a screw driver.
The handheld receiver can now be placed in the holder.
Note:
The handheld receiver has a built in magnetic sensor which will
ensure that the receiver cuts out when it is replaced in the holder.
10
TM