Assembling The Unit - Rockford Fosgate RFX series Einbau Und Betrieb

I
NSTALLATION

Assembling the Unit

1. Assemble the unit with mounting brackets and plates in the angle position it will be when
installed.
2. Set the assembled unit into position and mark the holes for the mounting plates.
3. Remove the mouting plates fron the assembly and mount into place. Ensure the bolts are
inserted into the mounting plates.
4. Remount the assembly into place. Ensure all nuts, screws and bolts are tightened and secure.
Use the following diagrams for installation;
Horizontal Mounting
6
Vertical Mounting
Nut
Machine
Screw
Bolt
Mark Holes
Mounting Screw
Nut