Getting Started - Momert 1706 Gebrauchsanweisung

GB
General advice
- Repairs must only be carried out by Customer Services or authorized suppliers.
- Do not open or repair the warmer yourself under any circumstances, otherwise its perfect functioning is
no longer guaranteed. Failure to observe this will invalidate the warranty. If you should have any
questions about using our warmers, please contact either your retailer or Customer Services.
- Shake the bottle or stir the food in the jar.
- Check that it is the correct temperature.
- To prevent the breeding of bacteria, which multiply fastest in the temperature range around 32-42°C,
please use the heated baby food as soon as possible.
- We do not recommend keeping the food warm for any longer, as this can cause important vitamins to
be lost. If you need it, you can keep clean water warm for long time.
- For hygienic and microbiological reasons, do not reheat food that has been already heated.
- Take care not to overheat food/liquids,
- After reaching the target temperature, the temperature can briefly rise again slightly due the residual
heat of the heating element, but will level of at the target temperature.
Intended use
- Only use the warmer to warm up baby food and drinks.
- The warmer is intended for use in the domestic environment only, not in commercial situations.
- Any improper use can be dangerous.

Getting started

1. Before use, ensure that the warmer and accessories (including mains cable) do not have any visible
damage.
2. Place the warmer on a firm, even surface.
3. Connect the mains plug to the socket. The warmer is ready for use.
- Pour water into the machine directly by sanitary bowl.
1.
- Put the milk bottle into the water.
4.
1. Holder
2.
2. Housing
3. Pilot light
5.
4. Cover
3.
5. Juicer
6. Food bowl
6.
Usage
Constant Temperature: turn the switch to , It is about 40°C. It is for keep warm the milk in the milk
bottle
Heating: turn the switch to , It is about 70°C.It is for heat up the baby food
Remark: Pilot light will turn on while heating. And it will turn off automatically while constant
temperature.
Usage Step for warming milk
- Pour water into the machine directly by sanitary bowl.
- Put the milk bottle into the water.
- insert the plug and turn the switch to the temperature you need.
Be careful to replace the bottle or bowl in case of burnt.
6