Inputting Signals - Sony LKRI-004 Bedienungsanleitung

Inputting Signals

1
Input Signals
When used in normal. Signal level is DVI1.0, Full Range
compliant.
When the 10-bit signal (10bit Twin mode) based upon Sony
unique specification is input. Signal level is Full Range
compliant.
When the 10-bit signal (10bit Single mode) based upon Sony
unique specification is input. Signal level is Full Range
compliant.
When the DTV signal is input. Signal level is DVI1.0, Limited
Range compliant.
When the 10-bit signal (10bit Twin mode) based upon Sony
unique specification is input. The signal level is Limited Range
compliant.
When the 10-bit signal (10bit Single mode) based upon Sony
unique specification is input. The signal level is Limited Range
compliant.
• When an extension cable is used, the signal may not be input
• If you select the 10bit Single mode, a DVI cable compatible with the
Depending on the input signal type, connect a commercially
available DVI cable to the appropriate connector.
Notes
correctly due to signal reduction.
Dual-link is required.
Connector used
DVI-D connector
DVI-D connector and
AUX connector
DVI-D connector
DVI-D connector
DVI-D connector and
AUX connector
DVI-D connector
Installation 23