Time And Date - Grant 600 series Bedienungsanleitung

4.9 INTERVAL
How often the logger will log is displayed here. This can be from 0.125s (8 readings per
second) to 2Hrs.
To change, press and hold the
Set key then use the
Set keys as required.
4.10

TIME and date

This displays the real time and date on two lines. The time is in 24 hour format (HH:MM:SS)
To change, press and hold the
Set key then use the
keys as required.
Set
If using the software to set the
logger up, it will automatically
inform you if the logger time is
different from the PC time.
4.11 TOOLS
The tools menu contains maintenance functions such as displaying the firmware version of
the logger, clearing all runs from the memory or resetting the logger to factory defaults.
Note that as the logger will record up to 8 runs then overwrite the oldest, it is not necessary
to clear the memory unless specifically required.
Note: It is recommended that
you only use the reset function
if instructed to do so by a
member of technical support.
28123
Sel and
Sel and
www.grant.co.uk
Version 6– June 2009
Page 8
EN