Getting Started With The Software; Installing The Software - Grant 600 series Bedienungsanleitung

5. Getting Started with the Software

5.1

Installing the software

After installing SquirrelView\PaintView an example setfile will be installed within the
SquirrelView installation directory. The example file will log the internal temperature of
the logger. In order to familiarise yourself with the logger the novice user may find this
example Setup useful.
5.2 Startup SquirrelView\PaintView and Select Logger Type
Click on the shortcut icon on your desktop to launch SquirrelView\PaintView or select it
from your start menu. When the SquirrelView\PaintView Assistant is loaded, ensure
the correct logger type and communication method is selected. This can be viewed in
the top right corner of the screen. If you need to make any changes select Logger Se-
lection from the
Assistant toolbar or run the Communication Wizard.
5.3 Synchronise Logger & PC
It is advisable to start by synchronising the Logger clock with the PC clock. See step 1
and 2 below:
Synchronise clocks:

From
SquirrelView\PaintView
Assistant click on Logger
Setup.
Version 6– June 2009
Page 9
 From the Logger
Setup screen select
the Logger Control
tab.
Click on Set Logger
Time to PC Time, click
OK on the confirma-
tion screen.
www.grant.co.uk
28123