The OQ610 is fitted with six thermocouple connector sockets which support K and T type thermocou-
ples. Connect each probe to an input socket, as shown below. The logger will recognise which chan-
nels are being used. If no probes are connected, the Squirrel will not start logging.
Note: T type thermocouples are software controlled and only available when used with SquirrelView
or PaintView software.
Note: Each plug has a wide terminal and a narrow terminal. Ensure that the plug is orientated cor-
rectly before making the connection.
To confirm which probes are connected, press the
function is displayed:-
Repeatedly press the
28123
3. Connecting the Probes
button to view each probe in turn.
Sel
www.grant.co.uk
button on the logger until the METER
Func
Version 6 - June 2009
Page 4
EN