Ares Line Xten Bedienungsanleitung Seite 6

• The first rule to follow is to sit down correctly covering the whole depth of the
seat and leaning well and uniformly your back on the backrest. In case a bigger
depth of the seat is needed, the seat can be slid forward. To do so, just press
the button under the right-hand side of the seat (1) and simultaneously press
forward with your hips.
The total sliding range available is 50mm divided into 5 positions.
• Now, it is important to adjust the height of the seat in order for the legs to be
at a 90° angle.
To do so, move the lever under the right-hand side of the seat upwards (2).
To reduce the height move the lever by remaining sat.
To increase the height raise the weight from the seat and move the lever.
The height can be adjusted within a range of 110 mm.
• Then, adjust the lumbar support in order to have a correct posture.
While sat, lift or lower the lumbar support behind the mesh of the backrest by
using both hands (3). An adjustment of 115 mm is allowed.
Find the best position depending on your build also by taking advantage of the
adjustment that the rotational movement of the lumbar support allows. Among
other things, this possibility of movement ensures the active self-positioning of
the lumbar support, thus allowing it to follow any variation of the disposition
during the synchronised oscillation movement.
The innovative shape of the support, consisting of two parts of soft
micro-cellular polyurethane that compress one against the other depending
on the pressure, allows a differentiated reaction depending on the compression
made by the back.
U M
SER ANUAL
• The lever under the left-hand side of the seat allows you to disable the
synchronised oscillation of the seat and of the backrest or to lock them at the
desired position (4).
To obtain a free oscillation, turn the lever upwards; to lock the armchair at the
desired position (there are 11 positions available) turn the lever downwards.
P.S.: since the armchair is furnished with an anti-shock security device, to free
the oscillation decrease the pressure on the backrest by leaning yourself a bit
forward. Only after doing so, you can turn the lever downwards and lean again
against the backrest. This movement will unlock the anti-shock device.
• The intensity of the oscillation can be adjusted depending on the weight of the
user by moving the knob which is situated in an axis with the right-hand lever
(5).The knob is extractable towards the right (6) to allow an easier adjustment
also during the oscillation movement.
To obtain a hardening of the oscillation mechanism (for heavier people) turn
the knob clock-wise and vice-versa.
• The armrests move in harmony with the backrest in such a way that the
angle between them always remains constant, in order to avoid the frequent
movement of the elbows during the oscillation.
The height of the armrests can be adjusted in an easy and immediate way
by pressing the button under the front part of the right arm (7). This button
operates a precision gas pump that allows the gentle and soft movement of
the armrests.
• For models with headrest
The height of the headrest can be adjusted depending on one's needs.
While remaining sat and using both hands the headrest can be lifted or
lowered to eight different positions (8).