AERMEC S300S Anleitungen Zur Installation, Gebrauch Und Wartung Seite 19

HYDRAULIC CIRCUIT EXAMPLE
Key
KW Domestic cold water inlet - Rp 1"
WW Domestic hot water outlet - Rp 1"
PV Heat exchanger water inlet - Rp 1"
PR Heat exchanger water outlet - Rp 1"
Z Recirculation - Rp 1"
Tr Copper sensor holder sheath - Øint. 7,2 mm
SF Drain stub pipe - R 3/4
Legend
A Hydraulic safety valve (not provided);
B Emptying cock (not provided);
C Drain tube (not provided);
D Expansion tank (not provided);
E Pressure reducer (not provided);
F One way valve (not provided);
G Intercepting valve (not provided);
H Pump (not provided);
I Boiler (not provided).
• CHARACTERISTICS
- One-layer enamel coating, "flow coating"
method according to DIN 4753 stan-
dards ("blue")
- Insulation: direct shielding made of polyu-
rethane without CFC and HCFC
- External covering: made of PVC, RAL
9016; 0.35mm thick
By Aermec
H
G
I
A
• TESTING
- Exchanger sealing check: using air at 6
bar (100%)
- Tank sealing check: by filling tank with
air at 6 bar, and then, immersing it into
water to avoid potential leaks (100%)
- End product sealing check: by filling tank
with air at 6 bar, and then, immersing it
G
H
F
G
F G
B
C
E
S300S-S400S-S500S 10.01 5890940_03
WW
PV
Z
PR
KW
D
in water to avoid potential leaks through
components installed (100%)
In the following pages you will find the
description, technical data and relevant
dimensions for each tank capacity.
fig. 2
19