Nilox J27-GOHD Bedienungsanleitung Seite 4

6. Pairing between Mini 3.5mm wireless audio adapter with Headset
1. Choose the right audio access mode according to different audio equipments,
turn on the launcher and headset.The indicators in launcher and headset will flash.
2. Constraint pairing action : Press the "volume+" and "volume-" buttom at the
same time about 2-3 seconds then enter into searching status,the red indicator
light on the headset will flash quickly. Once the constraint pairing is successfully,the
indicator light on the headset and lanucher will steadily brighten (Please keep head-
set in the distance of 20cm with launcher during pairing time ).
3. Automatically pairing action: Paired launcher and headset can automatically
pairing when power on.(Please keep headset in the distance of 20 meters with
launcher when power on).
Remarks: The headset had been paired with launcher during production, so when
it is opened, it will do automatically pairing action and can be used at once. Unless
disconnected,we suggest the user don't operate the "Constraint pairing action"
4. When launcher had been successfully connected with headset, start the music
player in computer and can enjoy stereo music by wireless at once.
7. How to connect headset to a decoder
1)Ensure that the headset and adapter are fully charged
2)Identify on back side of decoder the RCA/Scart output for TV. This output is
characterized by 3 female inputs colored on yellow, red and white.
The 3 plugs are usually indicated with a written AV our or similar
3)Insert the plug provided with headset on white and red input.
4)Insert on this plug female jack the wi-fi dongle
5)The yellow cable should be connected to the corresponding television socket.
8. Common problems handling issue:
1.If headset can't turn on, that might headset power has used up, please charge
power at first.
2.If headset is turned on then turned off automatically:
4
A. That might headset power has used up, please charge power at once.
B. Launcher and headset have failed connection, please pair again.
3.If headset can't automatically pair with launcher:
A. Please turn off headset and re-start it.
B. Re-insert USB cable into launcher USB socket again (when in USB access mode),
or press"On/Off" button in launcher repeatedly (when in 3.5mm audio input
mode).
C. Constraint pairing action.
4. If the pairing is successful, there is still no music output from headset:
A. Please restart music player.
B. Please kindly check to see whether the music player media of computer has turn
to minimum or silent mode.
5. Intermittent sound from the headset:
A. Please make sure the launcher and headset are in the valid receive distance, no
barrier between the headset and launcher.
B. Try the best to make sure launcher opposite the headset, and adjust it to the
best angle.
C. Try the best to keep the headset away from other wireless devices.
9. Attention
1.If headset can't be turned on,that might be power in headset is not enough,
please charge power at first.
2.In order to last battery usage time, please remember to turn off headset
when you finish using.Please charge power at least 3 hours at first time, while
charging,please use the charger which provided with the headset.
3. Please keep the headset in the package afte fully charged if no use for a long
time. Pleaser charge the headset every three months to avoid battery failure and
damage.
4.The battery of headset is original and please don't change it by yourself.
5. Please don't put the headset at wet place or rainy place.
6. Please don't put the headset at hot place or in temperature higher than 45°C,.
Don't put the headset in fire to avoid battery blast accidents.
7.When operating, please don't press too strong.
8.Please don't tear down headset by un-professional person.
5