Troubleshooting; Maintenance; Technical Specification - Veltron ZHQ2068-RMLED-II Bedienungsanleitung

Activating Press Switch Operations:
If you lose your remote control, please touch the Activation Button to
operate your heater.
G. Press the touch switch one time to operate the heater on power
(800W).
H. Press the touch switch the twice to operate the heater on power
(1200W)
I. Press the touch switch three times to operate on power (2000W)
J. Press the touch switch four times to operate the heater on power
(2000W) and LED light.
K. Press the touch switch five times to operate the LED light.
L. Press the touch switch six times to off the heater power and LED
light.
The main power switch must be turned on to operate the
heater.

MAINTENANCE

Unplug the unit and let it cool completely.
To keep the heater clean, the outer shell may be cleaned with a soft,
damp cloth. You may use a mild detergent if necessary. After
cleaning, dry the unit with a soft cloth.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or
rough brushes to clean the heater. This may cause damage or
deterioration to the surface of the heater.
Although this heater is outdoor approved, DO NOT immerse the
heater in water for your safety.
Wait until the unit is completely dry before use.
STORAGE
If the heater will not be used for a long period of time, store it in a cool, dry
location when not in use. To prevent dust and dirt build-up, use the
original packaging to repack the unit.
TROUBLE SHOOTING
If the heater will not operate, please check the following before seeking
repair of service:
Check if the power cord is plugged into an electrical outlet, if not plug in.
Check if electricity to the main fuse is working.
Make certain the power switches are turned on. If not, choose a setting.

Technical specification

• Model:ZHQ2068-RMLED-II
• Power supply 220-240V 50Hz
• Wattage max 2000W
• Net weight 3.1 kg
• Insulation class I
• Height 10cm
17