Product Diagram; Installation Instructions - Veltron ZHQ2068-RMLED-II Bedienungsanleitung

PRODUCT DIAGRAM

INSTALLATION INSTRUCTIONS

M. Heater must be installed by a qualified electrician.
N. Place the heater on a firm, level ceiling surface; level ceiling surface;
installation of the heater on a strong rigid support (such as strong
wooden beams or metal rails etc).
O. The Hook on the ceiling hanging the Patio Heater must be able to
take a weight 3 or 4 times that of the Patio Heater itself.
P. The distance between the bottom of the Patio Heater to the Floor
must be over 1.8M.
Q. Plug the Patio Heater into a grounded 220-240V 50-60Hz 10A power
outlet.
R. Only operate the heater when it is in the upright position.
Follow the below steps to install the heater
Step 1: Pull out the stainless steel wire to a appropriate
position in direction of up arrow.
Step 2: Unscrew the hook nut in direction of arrow.
15