ASROCK AM2XLI-eSATA2 Bedienungsanleitung Seite 15

Inhaltsverzeichnis

Verfügbare Sprachen

2.5 Dual Graphics XLI Operation Guide

This motherboard supports Dual Graphics XLI technology that allows you to install

two identical Dual Graphics XLI enabled PCI Express x16 graphics cards. Currently,

Dual Graphics XLI technology supports Windows

Please follow the installation procedures in this section.

Dual Graphics XLI Technology Requirements

1. You should have two identical Dual Graphics XLI-ready graphics cards that

are NVIDIA certified.

2. Make sure that your graphics card driver supports Dual Graphics XLI

technology. Please download and use NVIDIA graphics card driver version

81.98 which supports Dual Graphics XLI technology from NVIDIA website.

NVIDIA website: www.nvidia.com

3. Make sure that your power supply unit (PSU) can provide at least the

minimum power required by your system.

Enjoy the benefit of Dual Graphics XLI

Step 1.

Adjust the jumpers on this motherboard to enable PCIE2 slot (PCIE x8) and

PCIE4 slot (PCIE x8). Please refer to the previous section "Dual Graphics

Feature" for proper jumper setting.

Step 2.

Install the identical Dual Graphics XLI-ready graphics cards that are NVIDIA

certified because different types of graphics cards will not work together

properly. (Even the GPU chips version shall be the same.) Insert one graph-

ics card into PCIE2 slot and another graphics card to PCIE4 slot. Make sure

that the cards are properly seated on the slots.

Step3.

If required, connect an auxiliary power source to the PCI Express graphics

cards.

Step4.

Align and insert the Graphics Bridge to the goldfingers on each graphics

card. Make sure that the Graphics Bridge is firmly in place.

ASRock AM2XLI-eSATA2 Motherboard

XP and XP 64-bit operating system.

1 5

Inhaltsverzeichnis