Inhaltsverzeichnis
Werbung
3.5 Mounting
Follow these points by the mounting
Please attend of professional mounting
by authorisied personal. Furthermore
the system must be separat from the
electricity supply and so that voltage
free.
1.) After unpacking first place the unit with the
surface on one inlet of the packaging.
Therefore you can protect the chassis
against damaging!
2.) Open the screws on the rear side of the
protection hood.
3) Now you can mount the mounting arm and
the cables e.g. power or RS-232 cable. The
connection of the mounting support is
according the Rittal pivot CP-S.
4) Please attend by closing the service hood:
the seal must place correctly and without
damaging.
Because
incorrect placing the protection class IP 65
can't be warranted.
Ludwig-Rinn-Str. 10-14
by
damaging
D - 35452 Heuchelheim
or
Phone: +49-(0)641-96284-0
Fax: +49-(0)641-96284-28
www.tci.de
Seite 17 von 24
Werbung
Inhaltsverzeichnis
