MSI PC Mate series Handbuch Seite 44

▶ OC Retry Count [1]
Resets counts for overclocking retrying. When overclocking has failed, setting this
item as [1, 2, 3] will allow system to reboot 1, 2, 3 times with the same overclocked
configuration. If overclocking has failed every time, the system will restore the defaults.
▶ CPU Specifications
Press <Enter> to enter the sub-menu. This sub-menu displays the information of in-
stalled CPU. You can also access this information menu at any time by pressing [F4].
Read only.
▶ CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows what the key features
does the installed CPU support. Read only.
▶ MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and tim-
ings of installed memory.
▶ CPU Features
Press <Enter> to enter the sub-menu.
▶ AMD Cool'n'Quiet [Auto]
Enabled or disabled AMD Cool'n'Quiet function.
[Auto] Depends on AMD Design.
[Enable] Enables AMD Cool'n'Quiet function. The Cool'n'Quiet technology can
effectively and dynamically lower CPU speed and power consump-
tion.
[Disabled] Disables this function.
Important
When adjusting CPU Ratio, the Cool'n'Quiet function will be disabled automatically.
For CPU which supports the Turbo Core Tech., please set AMD Turbo Core
Technology and AMD Cool'n'Quiet as Disabled to retain the default CPU core speed.
▶ SVM Mode [Enabled]
Enables or disables CPU Virtualization.
[Enabled] Enables CPU Virtualization and allows a platform to run multiple oper-
ating systems in independent partitions. The system can function as
multiple systems virtually.
[Disabled] Disables this function.
▶ Core C6 State [Disabled]
Enables or disables C6 state support.
[Enabled] When the CPU enters C6 state, all cores will save architectural state
and reduce core voltages to zero volts. Wake up the CPU from C6
state will take a lot longer.
[Disabled] Disables this function.
En-32