Taurus ATECA ACTIVE Handbuch Seite 7

ENGLISH
Multifuction vacuum cleaner
Ateca Active
DESCRIPTION
A Wet & dry brush
B Tubes
C Hose set
D Manual air regulator
E Hose handle
G On/off switch
H Carry handle
I Opening buttons for deposit
J Dust Tank
K Hose connector
L Cord housing
M Crevice nozzle
N Multi-use brush
O Motor filter
P Wheels
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Do not use the appliance without its filter(s)
correctly in place.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the on/off switch
does not work.
- Use the appliance handle/s, to catch it or move it.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Use the appliance and its accessories and
tools in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use the appliance
for operations different from those intended
could result in a hazardous situation.
- Do not work on areas where there are metal
objects, such as nails and/or screws.
- Never vacuum hot or sharp objects (cigarette
butts, ashes, nails, etc.).
- Do not use the appliance on any part of the
body of a person or animal.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
VACUUMING FUNCTION:
- Fix the wheels on the base of the tank with the
screws. (Fig. 0)
- Fit the hose unit to the vacuum cleaners air
intake and turn right the hose. (Fig.1)
- To disconnect the hose unit from the vacuum
cleaner turn left and pull out the hose. (Fig.2)
INSERTION OF ACCESSORIES INTO THE
APPLIANCE'S GRIP:
- The appliance's grip is designed in such a way
that it allows the insertion of the following ac-
cessories (use the combination that best meets
your requirements):
- Extendible tube: designed to provide access to
surfaces which are out of reach and make floor
cleaning comfortable, its length can be adjust-
ed by using the adjustment control.
- Brush: specially designed for cleaning floors,
suitable for wet & dry.
- Lance: specially designed for getting into
cracks and difficult corners.
- Upholstery brush: especially suitable for clean-
ing textile surfaces.
USE:
- Take the length of cable required out of the
housing.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off
button.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off using the on/off button.
- Unplug the appliance from the mains.
- The cable housing means you can remove and
have available the required length of cable for
working with the appliance, preventing accident
risk situations.
- Clean the appliance.