Before The First Use - Domo DO7291S Bedienungsanleitung

PARTS
1. Floor nozzle
2. Button to pull out or retract brushes
3. 'Deep clean' technology sliding button
4. Telescopic tube
5. Slide button to set length of tube
6. Additional suction power control
7. Hose
8. Connection for hose
9. Handle
10. Handle lid dust bag compartment
11. Dust bag: 3 l
12. Dust bag frame
13. Full dust bag indicator
14. Accessories storage
15. Crevice vacuum cleaner
16. Dust brush
17. Parquet brush
18. Button for automatic cord rewinding
19. Button to set the suction power
20. On/off button
21. HEPA H12 filter behind grid

BEFORE THE FIRST USE

Always unplug the vacuum cleaner before (dis)assembling any parts.
HOSE
· Assembly: Put the connection ring at the end of the hose into the hose connection
in the vacuum cleaner and turn to the right so that it is locked into place.
· Disassembly: Unplug the vacuum cleaner. Turn the connection ring at the end of the
hose to the left and remove from the hose connection.
TELESCOPIC TUBE
1. Put the handle of the hose into the telescopic tube.
2. Set the telescopic tube to the desired length. For this, push the slide on the wand downwards and
pull on the upper part of the wand to extend it. Release the slide button and let the tube snap into
place.
3. Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the nozzle.
www.domo-elektro.be
10
15
14
7
12 11
8
14
13
19
20
17
16
6
5
9
4
18
1 3 2
21
DO7291S
23