Product Diagram; How To Use - Vava VA-HP008 Bedienungsanleitung

Product Diagram

⑤
⑥
⑦
①
Top Touch Zone (Brightness Control)
②
Light Cover
③
Blinking LED Indicator
④
Middle Touch Zone (Color Temperature Control)
⑤
USB Charging Port
⑥
Power Button
⑦
Handle
⑧
USB Charging Cable
⑨
Carabiner
①
②
③
④
⑧
⑨

How to Use

Power On / Off
Press and hold the Power Button for 1.5 seconds to power on /
off the night light. When the light is on, adjust the brightness by
tapping on the Top Touch Zone, or adjust the color
temperature by tapping on the Middle Touch Zone. When the
light is powered off, all touch buttons are disabled.
Desktop (Touch Mode)
Brightness Control: Tap and press on the Top Touch Zone to
increase or decrease the light's brightness. The LED indicator
will blink blue when the maximum or minimum brightness is
reached.
Color Temperature Control: Tap and press on the Middle
Touch Zone to adjust the color temperature. The LED
indicator will blink blue when the highest or lowest color
temperature is reached.
Standby Mode: When the light is on, lightly tap on the Top
Touch Zone twice to turn off the light and enter standby mode.
Tap twice again to wake up and turn on the light.
Note: In normal cases, the LED indicator will slowly blink blue in
standby mode for you to easily locate it in the dark. When the
battery is low, the LED indicator will slowly blink red. When being
charged, the LED indicator will fast blink.
Portable (Manual Mode)
You can use the night light as a portable LED light or camping
lantern. Press the Power Button once to enter portable mode.
In this mode, the Top Touch Zone and Middle Touch Zone are
disabled to prevent wrong operation caused by accidental
bumps.
Brightness Control: Press the Power Button to cycle through
100% full brightness, 50%, and 10% brightness mode.
SOS: When the brightness is set to 10%, press again to activate
SOS mode.
In portable mode, you can tap on the Top Touch Zone twice to
return to the Desktop Mode.
03/04