HAIRCUT TH31 Benutzerhandbuch Seite 23

3.2 Charging the battery on the charging base
Figure 3: Charging the clipper
battery on the charging base.
1. Switch the clippers off by pressing the
On/Off button (Figure 1, E).
2. Insert the power pack connector
(Figure 3, D) in the socket (Figure 3, C)
on the charging base.
3. Insert the power pack (Figure 1, N) in
the mains power socket.
4. Put the clippers (Figure 3, A) on the
base (Figure 3, B).
5. During the charging cycle, the LCD
unit shows the remaining autonomy
(Figure 1, K). The symbol (Figure 1, L)
is lit up.
6. The charging cycle is switched off
automatically. The symbol (Figure 1,
L) is deleted and the 90-minute
autonomy period (Figure 1, K) is
displayed.
7. Unplug the power pack; the clippers
can be used.
23