Backer WH10A Gebrauchsanleitung Seite 24

Presenting your extraction hood
These instruction manual describe two extraction hoods, whereby, the only
difference is in the width (50 cm and 60 cm).
Equipment Features
– Wall installation/below unit installation
– Selection of extraction or circulating air mode
– Selection of air outlet at top or bottom
– Three fan stages
– Lighting
– Depending on the model, surface from painted metal/stainless steel and glass
– Replaceable grease ilter pad
Checking is better
1. Unpack the appliance and remove all parts, plastic sections, adhesive tape and
foam padding.
2. Check to make sure that the delivery is complete:
– Individual components in accordance with the parts list, Page 7
– Instruction manual
3. If the delivery is incomplete, please contact our ordering department.
4. Check to see whether the appliance has transportation or other visible
damage.
If damage is determined, do not commission the appliance, please inform our
Service-Team. Thereby, state the appliance designation and order number
(refer to "Technical Data", Page 22).
Accessories (not included in the scope of delivery)
– Carbon ilter (required for circulating air mode)
– Exhaust air hose (required for extraction mode)
Intended use
The appliance is for the extraction of vapours, generated when cooking and
roasting , above a cooking area in a private household It is not designed for
commercial use. Before installation and using your appliance, please irst carefully
read the safety information and instruction manual. Only thus can you use all
functions in a safe and reliable manner. The operating instructions are based on
the standards and regulations applicable in the European Union. Abroad, also
observe the country-speci ic guidelines and laws!
Keep all safety information and instructions for the future. Give all safety
information and instructions for the product to a subsequent user.
2
Information