Instructions For Use - Lakeland 31605 Gebrauchsanweisung

INSTRUCTIONS FOR USE

• Plug in and switch on the hob at the socket.
• The hob will beep once and all the LED lights will illuminate briefly to show the hob is
connected to the power supply and on standby.
• The induction hob heats very rapidly, so place your pan with food onto the middle of
the hotplate first before turning it on. Heating an empty pan can discolour the metal
and warp the base.
• Press the On/Off button, the LED lights above each button will illuminate and blink.
• Select the temperature you require by pressing one of the temperature buttons.
for keeping
food warm
• The LED light above the button will illuminate.
• The hob will make a quiet sound as the electromagnetic coil is activated and the
magnet 'grips' the pan and starts to heat. You will hear the fan start. This is to monitor
the temperature of the hob during cooking and is completely normal.
• When you switch on the hob for the first time there may be an slight burning smell,
this is normal for a new heating element and will stop after a few uses.
• You can move between temperature settings during cooking, just touch the
temperature button, it will beep and the light above it will illuminate.
• To switch off, press the On/off button, it will beep and all the LED lights will go out.
• The fan will continue to run automatically for about one minute to cool the hob. Wait
until the fan has stopped before switching off and unplugging the hob at the socket.
Low Medium
70°C 110°C
for boiling
High ON/OFF
150°C
for frying
7