Frequently Asked Questions - Lakeland 31605 Gebrauchsanweisung

FREQUENTLY ASKED QUESTIONS

Question:
Why is the induction hob not working?
Answer: Check that the appliance is plugged in and switched on.
Question:
Why is the induction hob not heating up?
Answer: Check that the pan you are using is suitable for induction cooking and
the base of it is flat and clean. The pan must be already be placed on the
hotplate with food inside when you select your temperature to start heating.
If one of the temperature buttons is not selected within one minute of the
hob being switched on, it will automatically switch off and go into standby
mode.
Question: Why has the induction hob turned off while cooking?
Answer:
The induction hob has overheated, and automatically switched off. Check the
fan vents are not blocked. You can clean them using a soft dry brush.
If you have not pressed any buttons or the appliance has been heating
continuously for more than two hours, the induction hob will auto shut off.
There could be liquid or food on the hotplate surface, causing the appliance
to automatically switch off. Switch off and unplug at the socket, wipe any
spills off the hotplate with a damp cloth, and then a clean dry cloth, before
plugging in and switching on the hob again.
Question:
Why the fan still running, even though I have turned the induction hob off?
Answer: The fan inside is continuing to cool the induction hob is down, this is
normal. Take care after the fan has stopped, it may still be hot! Wait for the
fan to stop and the hob to cool completely before moving, cleaning and
storing.
Question: Why is the On/Off button blinking and the fan beeping when I am not
pressing any buttons?
Answer:
The fan is overheating. Switch off and unplug at the socket and allow the
hob to cool before switching on again. If the hob is still beeping contact the
Lakeland Customer Services Team.
9