Function Description - Lincar Stella Bedienungs- Und Wartungsanleitung

SWITCH CONTROL PANEL FUNCTION
The Pellet Stove is equipped with an electronic card, installed inside appliance, who
•
receives the function instructions from the control panel with a display who shows the
data. Pushing different button, it's possible to select different functions
BUTTON
Button 1 and 2 ................ .... - To high and to low selected room temperature, to modify the
Button 3(SET) ............
Button 4 .....................
Button 5 and 6 ............... - To high and to low functioning stove power.
Button 5 ....................... - Into the program by pressing 5, it return to the previous.
IGNITION CYCLE
The ignition cycle last normally 15 min and it's composed by 4 different phases which
•
will be visualized on display with the following marks:
"FAN ACC"
−
"LOAD WOOD" = Pellets Loading phase
−
"FIRE ON"
−
"ON.../ECO"
−
Equipement
Display
phase
FAn Heating ignition
Acc
blow plug.
LoAd
Ignition
Wood
equipment phase.
FirE
Ignition
on
equipment phase.
ON Power function.
1...5
Eco
Economy
18°...
Function.
24°
IT-GB-FR-ES-DE mod. 730-730 ECO-730N 15a

FUNCTION DESCRIPTION

data value which is programming.
- To access into programs ( temperature and time ).
- To confirm select data.
- To light / To turn off the stove and to exit from programs.
= Glow – plug pre-heating phase
= Combustion Pellets phase
= Power function phase
Equipment ignition phase, the equipment is in a phase of
ignition blow plug first heating.
The equipment start to feed the burner with the pellets, it
control the combustible ignition through the fumes feeler.
At combustible ignition ( on right burner side ) the
equipment wait for complete burner ignition in order to start
the power function.
The equipment is functioning on selected power till the
required temperature is reached.
At programmed temperature reaching, the equipment
functions at min. power (Economy) till the environment
temperature doesn't lower.
40/124
Explication