Peg Perego Pliko Switch Gebrauchsanleitung Seite 20

when it is occupied by a child.
12 FRONT BAR: to attach the front bar, slide the connections into the end of the armrests,
press the two side buttons and push the bar towards the seat until it clicks into place (fig_a).
To remove the front bar press the two buttons and pull it outwards (fig_b). Open the front
bar at one side only so that the child can be positioned in or removed from the seat more
easily.
13 BACKREST: to recline the backrest lift the lever (fig_a) and choose one of the 4 positions
(fig_b).
14 FOOTREST: to lower the footrest push the two levers downwards and then push the footrest
downwards (fig_a); to raise the footrest lift it upwards (fig_b).
15 5-POINT SAFETY HARNESS: to attach the safety harness, insert the two buckles of the
waist strap (with shoulder straps attached) into the leg divider strap until it clicks into place
(fig_a). To release, press both sides of the buckle and pull the waist strap to the sides at the
same time (fig_b).
16 To secure the child with the safety harness, insert the shoulder strap buckle in the special
holder on the backrest (fig_a) and, after fastening the harness, detach the buckle from the
backrest to allow the child more freedom of movement (fig_b). Position the shoulder strap
buckle just below the child's shoulders to ensure the straps remain in place without slipping
(fig_c). To tighten the waist strap, pull on both sides in the direction of the arrow (fig_d). To
loosen it do the opposite. The waist strap can be tightened as far as the safety lock (fig_e).
17 HOOD: to attach the hood insert the connections into the sides of the seat (fig_a) and then
fasten the buttons on the rear of the backrest (fig_b). To remove the hood: disengage the
connections and unbutton from the backrest. To raise the hood: pull it towards you; to close
the hood: push it back. To convert the hood into a sun canopy, open the double zipper (fig_
c) and unfasten the buttons on the rear of the backrest.
18 COVER: the cover can be used with the footrest in its raised position (fig_a): fit the cover,
button under the footrest and position above the front bar, securing with the elastic loops to
the hood buttons; alternatively, with the footrest lowered (fig_b): close the two side buttons
of the cover, fit the cover on, button it under the footrest and insert it under the front bar,
securing it with the lateral magnets.
19 RAIN CANOPY: to attach, zip the rain canopy to the hood zip, fit under the footrest (fig_a)
and insert the two lateral loops over the hood buttons (fig_b). If you wish to temporarily
lower the rain canopy simply open the zip; the canopy will remain attached to the side
buttons (fig_c).
20 REAR LEDGE: the rear ledge makes it easier to negotiate kerbs or level differences with the
stroller (fig_a) and can also be used to transport a second child (fig_b). To use the stroller
with two children, apply the brakes, position the smaller child in the seat and attach the
safety harness (1). Grip the handles (2) and help the second child to climb onto the ledge
(3).
21 FOLDING: the stroller can be folded without the seat, with the seat facing the person
pushing the stroller, or with the seat facing forwards. If the seat is facing the person pushing
the stroller: before folding it, lower the backrest completely; if the seat is facing forwards:
before folding the stroller raise the backrest, and once it is folded, lower it. To fold the
stroller set the front wheels to their fixed position and close the hood, if fitted. Lift the two
levers of the handles together and push downwards to release the side tubes (fig_a-b), pull
the central handle upwards (fig_c) until the safety catches engage (fig_d). When folded the
stroller will stand upright without support.
22 TRANSPORT: the stroller can be carried by the central handle, keeping the front wheels
fixed (fig_a) or by the side handle (fig_b).
23 REMOVING THE INTERNAL LINING: remove the leg divider strap (fig_a) from the top (by
pushing it up from under the seat), detach the two elastic loops of the sack from the footrest
and undo the four buttons on the seat (fig_b); undo the two buttons at the sides of the