Fuse Replacement; Specification; Environmental Protection - Carpoint 0623236 Benutzerhandbuch

iMPORtaNt
don't pre-set pressure during operating, it will stop operating.
NOtE
To avoid over-inflation of tires, please check the recommended car tire pressure in the vehicle's owner's manual or on the vehicle placard
located in the driver's door panel. For bicycle tires, please check the tire marking.
iNFlatiNg SPORtS EquiPMENt aNd/OR SMall iNFlataBlES
1. Roll out the 12V cord and connect the 12V adaptor to the outlet.
2. Screw the ball/balloon adaptors into the thread connector.
3. Insert the ball/balloon adaptor into valve of the object to be inflated.
4. Adjust to your desired pressure. (Refer to pressure pre-set)
5. Move the On/Off switch to 'I' position and the compressor will begin to operate. The compressor will automatically shut off once the
pre-set pressure is reached.
6. When it reaches preset pressure, the air compressor will stop automatically.
7. Remove the thread connector from the tire and disconnect the 12V car adaptor.
cautiON
allow compressor to cool for 10 minutes after 10 minutes of continuous operation.
Press button (9) for visibility in the dark. Move the On/Off switch to 'I' position to turn on light. Move the On/Off switch to 'O' position
to turn off light.

FuSE REPlacEMENt

1. Twist off the upper cap.
2. Remove the broken fuse and insert a new one.
3. Turn the cover back on the fuse.

SPEciFicatiON

SKU#: 199-5921-6
Working Voltage: 12V DC
Max. Pressure: 100 PSI
Cylinder diameter: 30mm
Fuse: 15A
Performance: 0 to 30 PSI in approximate 3 minutes (based on P195/65R15 tire. Time may vary depending on actual tire size
and operating conditions.)
Accessories: 2 adaptors

ENViRONMENtal PROtEctiON

Do not dispose of this product in the usual household garbage at the end of its life cycle; hand it over at a collection point for the
recycling of electrical and electronic appliances. The symbol on the product, the instructions for use or the packing will inform
about the methods for disposal.
The materials are recyclable as mentioned in its marking. By recycling, material recycling or other forms of re-utilization of old appliances,
you are making an important contribution to protect our environment.