Werbung
Bass port: Rest your palm on the top of the cabinet and insert fingers to carry.
Remote Control (install the included AAA batteries):
1. Power = Power
2. "i" = Info: Press repeatedly to see more info about the current
3. Speaker X = Mute, and Snooze when alarm sounds.
4. Up = Navigate up when in the menu. Also acts as seek up when
5. Left arrow = Track back.
6. Down = Navigate down when in menu. Also acts as seek down
7.
8. Right arrow = Next track; Hold to fast forward through track.
9. 3 Lines = Source icon menu (use up/down/enter to
10. Clock = Alarm menu (use up/down/enter to navigate and select);
11. Vol +/Vol- = Volume up/down
Note: The remote control cannot operate Amico when it is Off and the external power
supply is not connected.
Display Off: Press any remote key twice except Power and Alarm in standby to toggle
the display off/on
(when the power supply is connected).
any key (except Power and Alarm) once to turn the display on for 7 seconds. Once
Amico
is turned on, the display will reset to the previous Backlight Menu setting when
placed in standby again.
Set Up Wizard
After turning
Amico
on for the first time, the Como Audio logo will be displayed,
followed by the Setup Wizard. Follow the on-screen instructions for each step. Rotate
the Menu knob and push in briefly to select, or use the track, arrow, and Play (which
doubles as "Select") keys on the included remote control.
source.
in FM mode. Also shows station list in DAB mode (use
up/down/enter to navigate and select).
when in FM mode. Also shows station list in DAB mode (use
up/down/enter to navigate and select).
Play/Pause/SELECT
= Track Play/Pause. Long press brings up
menu; Brief press within menu acts as Select; Brief press in
Internet radio mode saves tuned station to Favorites.
navigate/select source).
Toggle alarms 1 & 2 on and off in standby.
5
When the display is off, press
EN
Werbung
