Werbung
EN
Back
1. 18VDC/2.8A
the plug for your region if more than one is provided.
automatically detect the correct voltage.
adapter is connected regardless of whether Amico is on or in standby. When Amico
is off without the adapter connected, it is completely off, not in standby. This is
intentional to preserve battery power.
2. Headphones: Connect a set of stereo headphones. The primary speakers will be
muted.
3. Auxiliary 1: Connect the analog audio out from another device.
4. Line out: Fixed level output to connect
device with an analog audio input.
5. USB: Insert a USB flash drive to playback music files then rotate the source knob and
push in briefly to select 'My Music'. This jack will also power Google's Chromecast
for Audio and Amazon's
also charge many smart phones. Do not exceed the jack's 5V/1A capacity.
audio from
Auxiliary input.
6. Speaker: For use only with Como Audio's optional Ambiente Speaker for stereo
sound.
7. Audio switch: When using
Ambiente Speaker is connected, set to ST (Stereo). When using two
together as a wireless stereo dedicated left and right pair, set one
and the other to R (Right).
8. Reboot: Press briefly to reboot Amico if an issue occurs. You will not lose any
settings or need to repeat the setup process.
power inlet:
Connect
Dot
(a short USB cable is included
an MP3 player, use Bluetooth or an audio cable connected to the
Amico
the included
external power supply and snap in
The power supply will
The battery will charge whenever the
Amico's
audio to a home receiver or other
independently, set to Mono. When the optional
4
for
power). This jack can
To play
Amico's
Amico
to L (Left)
Werbung
