Troubleshooting; Disposal; Possible Cause; Customer Service - Garden Groom PRO Bedienungsanleitung

Troubleshooting

Problem

Possible Cause

The mains plug has not
been connected to a
socket.
The device The collection bin and/
doesn't start. or adapter has not been
properly mounted.
The fuse for the socket is
deactivated.
The collecting bin is full.
The device does
The hose of the collec-
not collect any
tion bag is blocked.
cuttings.
The adapter ejection
chute is blocked.
The blade is
damaged.

Disposal

The packaging material is recyclable. Dispose of the packaging in an environmentally-
friendly manner and make it available for the recyclable material collection-service.
Dispose of the device in an environmentally-friendly manner when you decide to part
with it. The device does not belong in the household waste. Dispose of it at a
recycling centre for old electrical and electronic appliances.
For more information, please contact the administration in your locality.
Eurogarden SA, 3300 Tienen, Belgium
Tel. +32 1680 5438
e-mail info@eurogarden.be
02070_DE-GB-FR-NL_V1.indb 19
Solution
Insert the plug into the socket.
Remove the collection bin and/or adapter.
Remount it. Ensure that the operating light
has illuminated.
Check the fuse. Reinsert the fuse or switch it
back on.
Disconnect the mains plug. Empty the collec-
ting bin.
Disconnect the mains plug. Remove any cut-
tings from the hose if necessary.
Disconnect the mains plug. Remove any cut-
tings from the chute end.
Attention! Risk of Injury! Immediately disconnect the device
from the power supply. / Do not activate the device! Consult the

customer service.

18
15.02.10 14:10