Herunterladen Inhalt Inhalt Diese Seite drucken

Riso Perfect Binder G10 (200) Bedienungsanleitung Seite 50

Inhaltsverzeichnis

Werbung

Chapter 2 Maintenance
<Y000-0000> Consumable Error
These error messages are displayed when it is time to replace consumables or parts that require periodical
replacement.
There is no glue sheet in the Perfect Binder.
Add a glue sheet.
The Perfect Binder is full of cutting trash.
Open the front cover of Perfect Binder and
dispose the cutting trash.
<Z000-0000> Check Settings Error
These error messages are displayed when the cover is not completely closed.
Close the front cover of Perfect Binder.
Close the cover sheet inserter of Perfect
Binder.
<W000-0000> Warning
These warning messages are displayed when there is no more paper, the output tray is full, a peripheral device is
not connected, or there is another problem.
Job name:
This printing job is not acceptable because
Perfect Binder is unavailable. Printing
without using Perfect Binder is possible.
(The job has been deleted.)
Set paper with a size suitable for the cover
of the perfect binding in the tray below.
Tray:
Size:
This cover paper is not allowed for perfect
binding. Load the appropriate size of paper
in the following tray.
Tray:
Size:
2-10
Message
Message
Message
Action to Take
There is no more glue on the glue sheet in the Perfect
Binder. Replace the glue sheet. For more information on how
to replace the glue sheet, see "Replacing the Glue Sheet"
(p. 2-2).
Dispose all cutting trash in the cover sheet dust box of the
Perfect Binder.
For more information, see "Disposing the Cutting Trash"
(p. 2-5).
Action to Take
The front cover (or side cover) of the Perfect Binder is not
completely closed. Securely close it.
The cover sheet inserter of the Perfect Binder is not properly
set. Set the cover sheet inserter properly.
Action to Take
Turn off the power of the Perfect Binder and then on again.
There is a sequence to turning the power of the Perfect
Binder on.
For more information on turning the power on, see "Power
Supply" (p. 21).
If the recovery operations above does not help solve your
error, contact your dealer or authorized service
representative. Touch [Close] to continue using the printing
functions other than for binding.
There is no paper in the tray for cover sheets. Otherwise,
paper of a different size has been loaded. Load the right kind
of paper in the specified tray.
Perfect Binder User's Guide

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Perfect binder g10 (120)

Inhaltsverzeichnis