Riso Perfect Binder G10 (200) Bedienungsanleitung Seite 21

Terms of the Status of the Perfect Binder
Term
Printer
Glue heater
Warming up mode
Stand-by mode
Cooling down mode
Sleep mode
■ Linkage with the printer
The Perfect Binder's status changes to the following, according to the printer's status.
Printer
• The power for operating is turned on
• Recovery from the power-saving mode
• Power saving mode
Backlight off
Power consumption (in sleep) (Standard)
• The power for operating is turned off
• Power saving mode
Power consumption (in sleep) (Low)
* This can be configured with "Perfect Binder Settings" (p. 1-11).
Printers which can be connected to the Perfect Binder (ComColor GD series)
Heater which warms up the temperature of the glue to 180 °C and the glue tank
to 155 °C
Status that the glue heater warms up the glue and glue tank to the suitable
temperature
Status that the glue and glue tank is the suitable temperature so that the unit is
ready for binding
Status that the glue heater runs at the lower temperature to prevent the
deterioration of the glue
A status where the heating of the glue heater has been stopped to suppress
the power consumption of the Perfect Binder
Description
Perfect Binder
Starts in the "warming up mode" or "sleep mode",
according to the "Admin Menu Settings"*
The unit will enter the sleep mode.
The power turns off.
Perfect Binding
Perfect Binder User's Guide
19