Riso Perfect Binder G10 (200) Bedienungsanleitung Seite 38

Chapter 1 Binding
Manual Perfect Binding
Load the printed cover and body pages into the
Perfect Binder and create the booklet offline. For
manual binding, load one cover sheet and one set
of body pages.
• If either of the following images exist within
5 mm (7/32") from the cover binding margin, the
glue will not fix and cause the body pages to
peel off easily. Please be careful when you
create the cover.
- Solid black, thick color
- A ruled line thicker than 3 pt
• It may take a long time to warm up the glue unit
to the suitable temperature. It is recommended
that the temperature of the glue tank is checked
before performing a perfect binding job.
1
In the [Home 2] screen of the printer,
touch [Perfect Binding].
2
Select the size of the paper for the
body pages and touch [OK].
1-10
3
Load the cover and body pages into
the Perfect Binder and touch [OK]
on the confirmation screen.
Alternatively, press the [Start] key.
• With manual binding, all of the papers
loaded into the body sheet stacker are
bound into a single booklet. Load one
booklet amount of body pages.
The binding starts. When completed, the
confirmation screen is displayed.
• When the glue temperature is low, the
warming up starts. When it becomes the
stand-by mode, the binding starts
automatically.
4
Touch [Completed] on the
confirmation screen.
• To continue with manual binding, load the cover
and body pages into the Perfect Binder and
touch [OK].
• To perform [Manual Binding] with different
paper size, repeat the step 2 to 4.
Perfect Binder User's Guide