Using The Soundbar; Powering On / Off - Aukey SK-M52 Benutzerhandbuch

C. Connect to USB Port

Using the Soundbar

Powering On / Off

1. Plug the soundbar into a wall outlet. It will automatically enter standby mode and the LED indicator will light
solid red
2. Short-press the multi-function button to turn on the soundbar
3. To turn off, press and hold the multi-function button for 2 seconds or unplug from wall outlet
Playing Audio via Optical Input Connection
1. Remove the small protective rubber end caps from the connectors of the included Toslink optical cable.
Connect the soundbar to your TV using this cable, fully inserting the connectors so they click in
2. Turn on the soundbar and then short-press the multi-function button to switch to optical input mode with
the LED indicator lit up white
3. In TV sound settings, select the soundbar optical connection ('Audio Out/Optical,' 'Audio System,' or
similar) as the speaker (output for audio) instead of the TV speakers
4. Set your TV audio format to PCM (digital audio out / optical) instead of DTS or others
Audio Input
3.5mm Audio Cable
USB Port
- 06 -
USB Flash Drive
(up to 32GB)