Viessmann 6336 Bedienungsanleitung Seite 4

1.3 Checking the package contents
Check the contents of the package for completeness:
- Advertising board
- Replacement poster
- Manual
2. Introduction
This model produces the light by SMD-LEDs which is suitable to
the model. Low heat build-up and power input. Nearly unlimited
lifetime of the LED, so no more change is required.
3. Mounting
- Remove the model carefully from the package.
- Check the function before mounting.
- Drill a hole (Ø 2 mm) at the mounting place (see fig. 1).
- Put the cables from outside through the hole (fig. 2).
- Position the advertising board and glue its base plate to the
installation plate with a drop of superglue. When gluing, also
observe the instructions on the packaging of the adhesive.
4. Connection
Caution:
Resistor and diode at the cables are needed for proper
function of the model. Never cut them off! Never cover the
resistor with insulation material, because it has to be cooled
by surrounding air!
While connecting the cables, leave a loop of about 2 – 3 cm
length below the model, so that you can pull and reverse the
model from the mounting hole at any work.
Connect the LED-model to the lighting power output of a model
train transformer (e. g. item 5200) or power supply as shown
in fig. 3 and/or 4.
DC voltage: Connect the diode (red part with black marking)
with the positive pole and the resistor with the negative pole of
the power supply.
AC voltage: Operation with AC voltage could cause some flicker-
ing. We recommend to use the Viessmann power module, item
5215, which is sufficient for approx. 100 LED-lamps or -reflectors
(fig. 4). Connect the cable with the diode to the brown output
socket and the cable with the resistor to the red output socket.
5. Warranty
Each model is tested to its full functionality prior to delivery. The
warranty period is 2 years starting from the date of purchase.
Should a fault occur during this period please contact our service
department (service@viessmann-modell.com). Please send
the item to the Viessmann service department for checking and
repair only after consultation. If we find a material or production
fault to be the cause of the failure the item will be repaired free
of charge or replaced. Expressively excluded from any warranty
claims and liability are damages of the item and consequential
damages due to inappropriate handling, disregarding the instruc-
tions of this manual, inappropriate use of the model, unauthor-
ized disassembling, construction modifications and use of force,
overheating and similar.
6. Technical data
Operating voltage:
Operating current:
Änderungen vorbehalten. Keine Haftung für Druckfehler und Irrtümer.
Die aktuelle Version der Anleitung finden Sie auf der Viessmann Homepage
unter der Artikelnummer.
Subject to change without prior notice. No liability for mistakes and printing
errors.
You will find the latest version of the manual on the Viessmann website using
the item number.
4
(with and without 5215 power module)
Entsorgen Sie dieses Produkt nicht über den (unsortierten)
Hausmüll, sondern führen Sie es der Wiederverwertung zu.
Do not dispose of this product through (unsorted) domestic
waste, supply it to recycling instead.
Viessmann
Bahnhofstraße 2a
D - 35116 Hatzfeld-Reddighausen
info@viessmann-modell.com
www.viessmann-modell.de
13 – 24 V digital signal
Modelltechnik GmbH
10 – 16 V AC ~
14 – 24 V DC =
ca. 1 mA
Made in Europe
Stand 02/sw
09/2019
92380
Ho/Kf