Technical Specifications - Erreka JEDI-Serie Bedienungsanleitung

EC DECLARATION OF INCORPORATION FOR
PARTLY COMPLETED MACHINERY
(Directive 2006/42/EC, Annex II-B)
The manufacturer (*) Matz-Erreka,S.Coop., headquarters in
Bº Ibarreta s/n, 20577 Antzuola (Gipuzkoa), España
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
JES100E
JES100EM
Identification number and year of manufacturing: typed on
nameplate
Description: electromechanical actuator for garage doors
- is intended to be installed on garage doors to create a machine
according to the provisions of the Directive 2006/42/EC.
The machinery must not be put into service until the final
machinery into which it has to be incorporated has been declared
in conformity with the provisions of the Directive 2006/42/EC
(annex II-A).
- is compliant with the applicable essential safety requirements
of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2006/95/EC.
Electromagnetic Compatibility Directive 2004/108/EC.
Radio Directive 99/05/EC
The relevant technical documentation is available at the national
authorities' request after justifiable request to:
Matz-Erreka,S.Coop.
Bº Ibarreta s/n, 20577 Antzuola (Gipuzkoa), España
The person empowered to draw up the declaration and to
provide the technical documentation:
Roberto Corera
Business Manager
Antzuola, 17/10/2011
(*) made in extra EU Countries on behalf of Matz-Erreka,S.Coop.

TECHNICAL SPECIFICATIONS

Power supply
Absorbed power
Max accessories load 24V
Protection fuses
Door area
Average speed
Peak force
Nominal force
Working temperature
Rated Operating Time
Protection degree
Weight
25
JES100E JES100EM
230Vac - 50Hz 120Vac - 60Hz
160W 160W
12W 12W
SOURCE = 2,5A SOURCE = 3,5A
< 15m 2 < 15m
110mm/s 110mm/s
1000N 1000N
850N 850N
-20 ÷ +40 °C -20 ÷ +40 °C
> 4 min. > 4 min.
IP20 IP20
12Kg 12Kg
2